1. Investigation of mechanical characteristics and low cycle fatigue of elements after electromechanical treatment
  2. Investigation of mechanical characteristics of polymer films for packaging production
  3. Investigation of mechanical strength of adhesive joints of packages made from flock printing materials
  4. Investigation of micro mechanic membranes with functional piezoelectric film
  5. Investigation of micromechanical gas sensor response
  6. Investigation of milled wood surface roughness
  7. Investigation of miter corner joint strength of case furniture from particleboard
  8. Investigation of multi-agent control system
  9. Investigation of multilayered packages resistance to free fall on the solid surface
  10. Investigation of novel design piezoelectric bending actuators
  11. Investigation of oil-water ultrasound emulsifier
  12. Investigation of optical and electrical properties of silver sulfide films deposited on polyamide substrates
  13. Investigation of packages resistance under dynamics loads
  14. Investigation of polyvinyl chloride and thermoplastic polyurethane waste blend miscibility
  15. Investigation of rail metal of Kaunas fortress fortification narrow – gauge railway
  16. Investigation of relation between durability of adhesive joints of soft polymeric materials and roughness characteristics of glued surfaces
  17. Investigation of resistance to mechanical effect of Braille formed on different materials
  18. Investigation of ring-type ion ventilator
  19. Investigation of shielding properties of yarns, twisted with metal wire
  20. Investigation of signalling flow transfer processes based on SCTP protocol
  21. Investigation of silver nanoparticles formation kinetics during reduction of silver nitrate with sodium citrate
  22. Investigation of silver polymer nanocomposites
  23. Investigation of solid rocket motor strength characteristics by employing composite materials
  24. Investigation of structure formation in complex binder
  25. Investigation of structure of flock printing materials at package gluin using optical microscopy
  26. Investigation of supply posibilities of mechatronic actuator
  27. Investigation of tension of flock printing materials
  28. Investigation of textile bonded seams
  29. Investigation of textile fabrics behavior under compression
  30. Investigation of textiles elastic properties with a pendulum impact device
  31. Investigation of the air permeability of socks knitted from yarns with peculiar properties
  32. Investigation of the characteristics of the low frequency broadband contact transducers
  33. Investigation of the construction of probabilistic low cycle fatigue design curves at strain cycling
  34. Investigation of the electric field of the plane capacitor with round hole
  35. Investigation of the electrical characteristics of the metal/organic semiconductor/metal structures with top contact configuration
  36. Investigation of the elements of the printing device
  37. Investigation of the experimental car body in static bending and torsion
  38. Investigation of the lamb waves generation in isotropic plates using ultrasonic broadband transducers
  39. Investigation of the liquid retention capacity of terry fabrics
  40. Investigation of the mechanism of interaction at the hydrothermal conditions of zeolite - cubic analcime with the Li+, Mg2+, Sr2+ and Fe3+ ions
  41. Investigation of the possibility of forming nanofibres with potato starch
  42. Investigation of the resistance to pile loop extraction of linen and ramie fabrics
  43. Investigation of the spectrum decomposition technique for estimation of the group velocity Lamb waves
  44. Investigation of the spectrum decomposition technique for group velocity measurement of Lamb waves propagating in CFRP composite plate
  45. Investigation of the steady state operation conditions of rotational vibroactuators
  46. Investigation of the strength of textile bonded seams
  47. Investigation of the thermal properties of socks knitted from yarns with peculiar properties. Part II: Thermal resistance of socks knitted from natural and stretch yarns
  48. Investigation of the water vapour transfer properties of textile laminates for footwear linings
  49. Investigation of the zero-crossing technique in measurement of phase velocities of the guided wave in thin CFRP composite plate
  50. Investigation of thermal stability of holographic plate