1. Influence of industrial washing and cyclic fatigue on slippage of linen fabric threads along the seam
  2. Influence of inlay-yarn properties and insertion density on the compression properties of knitted orthopaedic supports
  3. Influence of knits structure on flammability and comfortability
  4. Influence of laundering on the quality of sewn cotton and bamboo woven fabrics
  5. Influence of multilayer beams cross-section shape on stiffness under bending
  6. Influence of non-magnetic admixtures to the signal of electromagnetic flow meter
  7. Influence of pile height and density on carpets end – use properties
  8. Influence of plain knits structure on flammability and air permeability
  9. Influence of ply orientation on mode I interlaminar fracture toughness of woven carbon and glass composites
  10. Influence of stainless steel circular pipes welding methods and parameters to the process accuracy and productivity
  11. Influence of structural changes in cotton blend fabrics on their mobility
  12. Influence of surface hardening on low cycle tension compression and bending characteristics
  13. Influence of surface hardening on low cycle tension-compression and bending durability in stress concentration zones
  14. Influence of surrounding space on heat transfer effectiveness of refrigerator's condenser
  15. Influence of technological parameters on the periodical effects of fancy yarns
  16. Influence of technologies on quality of distance learning
  17. Influence of the dispersion on measurement of phase and group velocities of Lamb waves
  18. Influence of the electric reactor magnetic field on the electromagnetic relays
  19. Influence of the gypsum dehydration temperature and alkali additives on the properties of anhydrite cement
  20. Influence of the knitting structure of double-layered fabrics on the heat transfer process
  21. Influence of the number of yarns in a loop on the flammability of knits
  22. Influence of the rigid element area on the compression properties of knitted orthopaedic supports
  23. Influence of the setting activators on the physical mechanical properties of phosphoanhydrite
  24. Influence of the shape of the bottom rotating electrode on the structure of electrospun mats
  25. Influence of the tempering temperature and laser beam on hardness and wear of the overlay welded layers
  26. Influence of the thermal EOS deformations on the modulation characteristics
  27. Influence of thermal treatment on the hygroscopicity and dimensional stability of oak wood
  28. Influence of turbocompressor working mode on vibroactivity
  29. Influence of users behaviour to IPTV service
  30. Influence of washing on the electric charge decay of fabrics with conductive yarns
  31. Influence of work hardened layer thickness on the mechanical properties of metals
  32. Informacinių technologijų valstybinio brandos egzamino praktinių užduočių ypatumai
  33. Informacinių technologijų įtaka politiniam dalyvavimui: interneto skverbties ir rinkėjų aktyvumo tendencijos Lietuvoje
  34. Information entropy determination in scales measurement including mechatronic approach
  35. Information transmission availability in WDM networks
  36. Initial water temperature influence on the thermal state of evaporating droplets
  37. Innovative method of flow profile formation for ultrasonic flowmeters
  38. Inovacijos įmonės veiklos kontekste: teorinis aspektas
  39. Inovacijų vieta viešojo valdymo modernizavimo struktūroje: teorinis aspektas
  40. Inovatyvių nuotolinio mokymosi technologijų taikymas pedagogų profesiniame rengime
  41. Insertion investigation of cylindrical parts to be assembled with clearance
  42. Insertion of Cu nanoparticles into a polymeric nanofibrous structure via an electrospinning technique
  43. Insertion of electrospun nanofibres into the inner structure of textiles
  44. Insertion simulation cylindrical parts under kinematical excitation of mobile based part
  45. Inspection system based on computer vision
  46. Instability of structure plates under two-directional compression
  47. Institucinės dimensijos vaidmuo darnaus vystymosi koncepcijoje
  48. Institutional vs. sectoral dimension of innovation strategies of firms
  49. Integrated front end electronics design for micromachined ultrasound transducers
  50. Integrated product and process development using rapid prototyping and rapid tooling technologies