1. Influence of boundary conditions on the vibration modes of the smart turning tool
  2. Influence of calcium carbonate fillers on the properties of recycled poly(e-caprolactone) based thermoplastic polyurethane
  3. Influence of cantilever length on stress distribution in fixation screws of All-on-4 full-arch bridge
  4. Influence of carburized surface on plastic properties of steel during tempering
  5. Influence of chemical composition and structure on the properties of overlay welded structural steel
  6. Influence of chemical surface modification of woven fabrics on ballistic and stab protection of multilayer packets
  7. Influence of chromatic ambient light over colour luminance contrast on projection screen
  8. Influence of colour difference over visibility in multimedia projection
  9. Influence of corporate social responsibility on competitive abilities of corporations
  10. Influence of different electrolysis parameters on electrodeposition of γ- and α-Mn from pure electrolytes — a review with special reference to Russian language literature
  11. Influence of embroidery threads on the accuracy of embroidery pattern dimensions
  12. Influence of emitted electrons on the method for direct measurement of condensate resistance
  13. Influence of fabric structure on its weavability
  14. Influence of fabric structure on the character of fabric breakage
  15. Influence of fabric structure parameters on seam slippage
  16. Influence of guiding tooth geometry on contact forces distribution in the human masticatory system: a FEM study
  17. Influence of high temperature heat treatment on creep properties of high speed steel
  18. Influence of hygrothermal treatment on the stress relaxation of clothing fabrics' systems
  19. Influence of imbalance force angular position to vertical and horizontal rotors rolling bearings defects diagnostics
  20. Influence of industrial washing and cyclic fatigue on slippage of linen fabric threads along the seam
  21. Influence of industrial washing on denim properties
  22. Influence of inlay-yarn properties and insertion density on the compression properties of knitted orthopaedic supports
  23. Influence of knits structure on flammability and comfortability
  24. Influence of laundering on the quality of sewn cotton and bamboo woven fabrics
  25. Influence of layer orientation upon textile systems tensile properties. Part 1. Investigation of tensile strain and resilience
  26. Influence of lightning discharge on microstructure, mechanical properties and failure of armature steel
  27. Influence of mechanical deformation on compressive strength of open and closed cells resilient materials
  28. Influence of multilayer beams cross-section shape on stiffness under bending
  29. Influence of new fiber-forming polymers structure on garment hand parameters
  30. Influence of non-magnetic admixtures to the signal of electromagnetic flow meter
  31. Influence of overfeed and twist on fancy yarns structure
  32. Influence of pile height and density on carpets end – use properties
  33. Influence of plain knits structure on flammability and air permeability
  34. Influence of plasma transfered arc process parameters on structure and mechanical properties of wear resistive NiCrBSi-WC/Co coatings
  35. Influence of ply orientation on mode I interlaminar fracture toughness of woven carbon and glass composites
  36. Influence of shrinkage on air and water vapour permeability of double-layered weft knitted fabrics
  37. Influence of stainless steel circular pipes welding methods and parameters to the process accuracy and productivity
  38. Influence of stitching pattern on deformation behaviour of woven fabric during forming
  39. Influence of structural changes in cotton blend fabrics on their mobility
  40. Influence of surface hardening on low cycle tension compression and bending characteristics
  41. Influence of surface hardening on low cycle tension-compression and bending durability in stress concentration zones
  42. Influence of surrounding space on heat transfer effectiveness of refrigerator's condenser
  43. Influence of technological parameters on the periodical effects of fancy yarns
  44. Influence of technological parameters on the properties of granulated dolomite
  45. Influence of technologies on quality of distance learning
  46. Influence of the dispersion on measurement of phase and group velocities of Lamb waves
  47. Influence of the elastane fibre on the woven fabric structural mobility
  48. Influence of the electric reactor magnetic field on the electromagnetic relays
  49. Influence of the gypsum dehydration temperature and alkali additives on the properties of anhydrite cement
  50. Influence of the knitting structure of double-layered fabrics on the heat transfer process