1. Advanced process equipment for PECVD silicon nitride deposition – an experimental study
  2. Analysis of silver nanoparticles produced by chemical reduction of silver salt solution
  3. Application of plasma chemical etching in control of optical properties of multilayered dielectric gratings
  4. Deposition of Fe3O4 thin films by reactive magnetron sputtering and solid state reaction
  5. Dielectric properties of the ion beam deposited SiOx doped DLC films
  6. Effectiveness of cold–heat contrast and local compression therapy device in physiotherapy for the patients with latent myofascial trigger points
  7. Effects of heating by arc discharge on structure and chemical composition of coatings formed using high velocity oxygen fuel and flame spraying processes
  8. Effects of the high temperature annealing on structure of the high velocity oxygen fuel deposited WC-Co coatings
  9. Effects of the low energy ion beam nitridation on GaAs surface structure and electrical characteristics of Au-nGaAs and Co-nGaAs Schottky contacts
  10. Electrical characteristics of the organic field effect transistors based on new organic semiconducting compounds
  11. Finite-element analysis of microelectromechanical membranes vibration
  12. Formation and analysis of dot-matrix holograms
  13. Imprint lithography for large scale angular encoders
  14. Influence of WC/Co concentration on structure and mechanical properties of the thermally sprayed WC/Co-NiCrBSi coatings
  15. Investigation of dynamic parameters of multilayered microelectromechanical membranes with finite element modeling
  16. Investigation of silver nanoparticles formation kinetics during reduction of silver nitrate with sodium citrate
  17. Investigation of silver polymer nanocomposites
  18. Ion beam synthesis of the anti-sticking diamond-like carbon layers
  19. Kinetics of residual stresses in electrochemically doped ITO thin films
  20. Micromachining of diamond-like carbon deposited by closed drift ion source for cantilevers and membranes
  21. Optical evaluation of geometrical parameters of micro-relief structures
  22. Optical transmittance method for in-situ analysis of adsorption phenomena from residual gases
  23. Optical, XPS and XRD studies of semiconducting copper sulfide layers on a polyamide film
  24. Oxygen ion beam etching of diamond like carbon films
  25. Probe temperature measurements and optical emission spectroscopy in vacuum plasma spraying process control
  26. Properties of Ge(X)O(Y):H thin films produced by plasma-assisted chemical vapor deposition
  27. Residual gas analysis in color cathode ray tubes
  28. Scanning electron microscopy of semiconducting nanowires at low voltages
  29. Structural and morphological study of silver electrodeposits
  30. Structure and tribological properties of polytetrafluoroethylene nanocomposite coatings formed from active gas phase
  31. Surface properties after wet release of microcantilever
  32. The influence of Se treatment and annealing on ferromagnetic-nGaAs Schottky contact and interface properties
  33. The influence of micromycetes on the corrosion behaviour of metals (Steel, Al) under conditions of the environment polluted with organic substances
  34. XPS investigation of TiO2/ZrO2/SiO2 films modified with Ag/Au nanoparticles
  35. Žmogaus raumens šaldymo ir šildymo įrenginys