| Title |
Facility for catalysts testing, research of CuO / γ – Al2O3 coatings / |
| Another Title |
Katalizatorių testavimo stendas, cuo/γ–al2o3 dangų tyrimai. |
| Authors |
Babilius, A ; Babilius, K ; Melkūnas, R ; Buinevičius, K |
| Full Text |
|
| Is Part of |
Mechanika.. Kaunas : Technologija. 2008, Nr. 4, p. 64-70.. ISSN 1392-1207. eISSN 2029-6983 |
| Abstract [eng] |
The article presents investigations of catalytic CuO/γ - Al2O3 coatings obtained by activated thermo-chemical condensate deposition method. It was researched: a) coating adhesion, resistance to acids, phase and chemical composition, crystal dimensions, morphol-ogy; b) technical solutions and main parameters of the test facility for catalysts testing and determining conver-sion of carbon monoxides and nitrogen oxides; c) catalytic CO and NOx conversion, in comparison of two type catalytic monoliths: CuO/γ - Al2O3 (on the steel plates , thermally processed at 650°C) and Pt/Mg2Al4Si5O18 (Pt/cardierite, classical ceramic TWC catalyst). The obtained results show that CuO/γ - Al2O3 type catalyst, has higher inflammation temperature in all cases in comparison with Pt/cardierite type catalyst. CuO/γ - Al2O3 type catalyst the same as Pt/cardierite type catalyst operates well in case of NOx conversion, if low oxygen amount is present in flue gas. In case of CO con-version, having oxygen concentrations 0.6% and 1.2% at the inlet to catalytic reactor, Pt/cardierite type catalyst reaches 92%, while CuO/γ - Al2O3 type catalyst maximum available – 100% conversion. |
| Published |
Kaunas : Technologija |
| Type |
Journal article |
| Language |
English |
| Publication date |
2008 |
| CC license |
|
