Title UV-light curing of 3D printing inks from vegetable oils for stereolithography /
Authors Barkane, Anda ; Platnieks, Oskars ; Jurinovs, Maksims ; Kasetaite, Sigita ; Ostrauskaite, Jolita ; Gaidukovs, Sergejs ; Habibi, Youssef
DOI 10.3390/polym13081195
Full Text Download
Is Part of Polymers.. Basel : MDPI. 2021, vol. 13, iss. 8, art. no. 1195, p. 1-16.. ISSN 2073-4360
Keywords [eng] biopolymers ; photopolymerization ; kinetics ; UV-light curing inks ; additive manufacturing ; stereolithography
Abstract [eng] Typical resins for UV-assisted additive manufacturing (AM) are prepared from petroleum-based materials and therefore do not contribute to the growing AM industry trend of converting to sustainable bio-based materials. To satisfy society and industry’s demand for sustainability, renewable feedstocks must be explored; unfortunately, there are not many options that are applicable to photopolymerization. Nevertheless, some vegetable oils can be modified to be suitable for UV-assisted AM technologies. In this work, extended study, through FTIR and photorheology measurements, of the UV-curing of epoxidized acrylate from soybean oil (AESO)-based formulations has been performed to better understand the photopolymerization process. The study demonstrates that the addition of appropriate functional comonomers like trimethylolpropane triacrylate (TMPTA) and the adjusting of the concentration of photoinitiator from 1% to 7% decrease the needed UV-irradiation time by up to 25%. Under optimized conditions, the optimal curing time was about 4 s, leading to a double bond conversion rate (DBC%) up to 80% and higher crosslinking density determined by the Flory–Rehner empirical approach. Thermal and mechanical properties were also investigated via TGA and DMA measurements that showed significant improvements of mechanical performances for all formulations. The properties were improved further upon the addition of the reactive diluents. After the thorough investigations, the prepared vegetable oil-based resin ink formulations containing reactive diluents were deemed suitable inks for UV-assisted AM, giving their appropriate viscosity. The validation was done by printing different objects with complex structures using a laser based stereolithography apparatus (SLA) printer.
Published Basel : MDPI
Type Journal article
Language English
Publication date 2021
CC license CC license description