| Abstract [eng] |
• The research investigated the impact of environmental factors (temperature and humidity) on pine glulam, oak glulam, and laminated veneer lumber (LVL) elements, all of which can be used in building structures. Elements underwent freezing, heating, drying, and wetting processes in different modes, thereby simulating different environmental conditions that could be encountered during the service period of the materials. Their mechanical properties (modulus of elasticity-MOE and coefficient of damping) were recorded at each stage. It was determined that, in the case of dry construction elements (where a moisture content was between 7.0 and 14.0 %), the MOE increases by a few percentage points with decreasing temperature and humidity levels, and decreases with increasing temperature and humidity levels. The coefficient of damping varied by 20 %-in most cases, when the modulus of elasticity increased, this decreased, and vice versa. Under extreme environmental changes (with the elements being soaked, frozen at-25 °C, and dried at 40 °C), the MOE of the glued timber decreased by 16 % when this parameter of LVL decreased by about 10 %. Alterations in viscous properties produced similar results (the coefficient of damping increased by 50 % for the glued timber and by 66 % for the LVL). This is explained by the partial destruction of the element structure, the occurrence of cracks, and the decreased anisotropy of the LVL structure. |
