Title Eight element side edged framed MIMO antenna array for future 5G smart phones /
Authors Kiani, Saad Hassan ; Altaf, Ahsan ; Abdullah, Mujeeb ; Muhammad, Fazal ; Shoaib, Nosherwan ; Anjum, Muhammad Rizwan ; Damaševičius, Robertas ; Blažauskas, Tomas
DOI 10.3390/mi11110956
Full Text Download
Is Part of Micromachines.. Basel : MDPI. 2020, vol. 11, iss. 11, art. no. 956, p. 1-13.. ISSN 2072-666X
Keywords [eng] 5G ; Liquid Crystal Display (LCD) ; MIMO antenna ; mobile terminals ; smart city ; smart phone
Abstract [eng] This paper presents a novel design of a Multiple Input Multiple Output (MIMO) antenna system for next generation sub 6 GHz 5G and beyond mobile terminals. The proposed system is composed of a main board and two side boards. To make the design cost-effective, FR4 is used as a substrate. The design is based on a unit monopole antenna etched at the side substrate. The single element is resonating at 3.5 GHz attaining a 10 dB bandwidth of 200 MHz and a 6 dB bandwidth of 400 MHz. The single element is then transformed into an MIMO array of 8-elements with an overall dimension of 150 mm × 75 mm × 7 mm, providing pattern diversity characteristics and isolation better than -12 dB for any two radiating elements. A number of studies such as effects of human hand on the system that includes single hand mode and dual mode scenarios and the effects of Liquid Crystal Display (LCD) over the principal performance parameters of the system are presented. The envelop correlation coefficient (ECC) is computed for all the scenarios and it is found that ECC is less than 0.1 for any case and maximum channel capacity is 38.5 bps/Hz within the band of interest. The main advantage of the proposed design over available designs in the literature is that almost all of the main substrate is empty providing wide space for different sensors, systems, and mobile technology components. A brief literature comparison of the proposed system is also presented. To validate the proposed model, a prototype is fabricated and results are presented. This design can be applied on higher frequencies to future micromachines for on chip communications using same theocratical approach as the space for higher frequencies in mmwave spectrum has been reserved. The simulated results are in an excellent agreement with the measured results. All the main performance parameters of the design are calculated and compared with the measured results wherever possible.
Published Basel : MDPI
Type Journal article
Language English
Publication date 2020
CC license CC license description