| Title |
Current-voltage characteristics of the metal / organic semiconductor / metal structures: top and bottom contact configuration case / |
| Another Title |
Metalo-puslaidininkio-metalo darinių su elektrodu ant puslaidininkio ir su elektrodu po puslaidininkiu voltamperinių charakteristikų tyrimas. |
| Authors |
Meškinis, Šarūnas ; Pucėta, Mindaugas ; Šlapikas, Kęstutis ; Tamulevičius, Sigitas ; Gudonytė, Angelė ; Gražulevičius, Juozas Vidas ; Michalevičiūtė, Asta ; Malinauskas, Tadas ; Keruckas, Jonas ; Getautis, Vytautas |
| DOI |
10.5755/j01.ms.19.1.3816 |
| Full Text |
|
| Is Part of |
Materials science = Medžiagotyra.. Kaunas : KTU. 2013, vol. 19, no. 1, p. 3-9.. ISSN 1392-1320. eISSN 2029-7289 |
| Keywords [eng] |
organic semiconductor ; metal-semiconductor contacts ; spin coating ; current-voltage characteristics ; charge transport mechanism |
| Abstract [eng] |
In present study five synthesized organic semiconductor compounds have been used for fabrication of the planar metal / organic semiconductor / metal structures. Both top electrode and bottom electrode configurations were used. Currentvoltage (I-V) characteristics of the samples were investigated. Effect of the hysteresis of the I-V characteristics was observed for all the investigated samples. However, strength of the hysteresis was dependent on the organic semiconductor used. Study of I-V characteristics of the top contact Al/AT-RB-1/Al structures revealed, that in (0 – 500) V voltages range average current of the samples measured in air is only slightly higher than current measured in nitrogen ambient. Deposition of the ultra-thin diamond like carbon interlayer resulted in both decrease of the hysteresis of I-V characteristics of top contact Al/AT-RB-1/Al samples. However, decreased current and decreased slope of the I-V characteristics of the samples with diamond like carbon interlayer was observed as well. I-V characteristic hysteresis effect was less pronounced in the case of the bottom contact metal/organic semiconductor/metal samples. I-V characteristics of the bottom contact samples were dependent on electrode metal used. |
| Published |
Kaunas : KTU |
| Type |
Journal article |
| Language |
English |
| Publication date |
2013 |
| CC license |
|
